View CMM6001-SC07_4143353.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

0.05-3.0 GHz High Dynamic Range Amplifier
August 2007 - Rev 15-Aug-07
CMM6001-SC
Functional Block Diagram
Ground 4
Features
0.05 to 3.0 GHz Frequency Range 37 dBm Output IP3 2.8 dB Noise Figure 12.5 dB Gain 20.5 dBm P1dB SOT-89 SMT Package, RoHS Compliant Single Power Supply +3V to +5V Voltage Rail
1 Input
2
3
Ground Output Bias
Description
The CMM6001-SC is a high dynamic range amplifier designed for applications operating within the 0.05 to 3.0 GHz frequency range. It is an ideal solution for transmit and receive functions where high linearity is required. The amplifier has the flexibility of being optimized for a number of wireless applications. The combination of low NF and high IP3 at the same bias point make it an ideal transmit or receive solution when used in applications including cellular and PCS (personal communications service) operating from 0.8 to 2.2 GHz; MMDS (multichannel multipoint distribution systems) operating from 2.2 to 2.7 GHz; and WLAN (wireless LAN) operating at 2.4 GHz.
Applications
Wireless Local Loop Transmit and Receive UNH Transmit and Receive Dual Band 802.11 WLAN WiMAX CATV
Absolute Maximum Ratings
Supply Voltage RF Input Power Storage Temperature Junction Temperature Operating Temperature Thermal Resistance
+6.0 V +10 dBm -55C to 150C 150C -40C to +85C 65 C/W
The CMM6001-SC is packaged in a low-cost space efficient, surface mount SOT-89 package which provides excellent electrical stability and low thermal resistance. All devices are 100% RF and DC tested.
Operation of this device above any of these parameters may cause damage.
Electrical Characteristics
Parameter Condition
Unless otherwise specified, the following specifications are guaranteed at room temperature in a Mimix test fixture.
Min
Typ
Max
Units
F requency R ange Gain Externally matched Input Return Loss Externally matched O utput I P3 N oi se F i gure O utput P1dB O perati ng C urrent R ange S uppl y V ol tage
0.05 10.5 +33
3. 0 12.5 -10 +37 2. 8 20. 5 75 5. 0
55
100
GHz dB dB dB m dB dB m mA V
Notes: 1. T = 25C, Vdd = 5.0, Frequency = 800 MHz, 50 Ohm system 2. OIP3 measured with two tones at output power of 5 dBm/tone separated by 10 MHz.
Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099 Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com
Page 1 of 5
Characteristic Data and Specifications are subject to change without notice. (c)2007 Mimix Broadband, Inc. Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept their obligation to be compliant with U.S. Export Laws.
0.05-3.0 GHz High Dynamic Range Amplifier
August 2007 - Rev 15-Aug-07
CMM6001-SC
S-Parameters vs Frequency 20
Units
Application Circuit
Parameter Typical
S21 10 Magnitude, dB 0 S11 -10 -20 S22 -30 -40 0.5
Frequency Range Gain Input Return Loss Output Return Loss Output IP3 Output P1dB Noise Figure
900 12.5 -18.0 -17 +37 20.5 2.7
1900 11.5 -11.5 -16 +37 19.5 2.8
2400 10.8 -10.0 -15 +37 19.5 2.9
MHz dB dB dB dBm dBm dB
Notes: 1. Typical values reflect performance in recommended application circuit.
1.0
1.5 2.0 Frequency, GHz
2.5
3.0
RF IN
C1 56 pF
CMM6001-SC SOT-89 T = 375 mil T = 100 mil T = 70 mil
C4 T = 485 mil 56 pF
RF OUT
uu uu
L1 10 nH
uu uu
L2 12 nH Vcc 5V
INPUT MATCHING NETWORK
C2 0.1 F
Ref Designator C1, C4 C2 L1 L2
Value 56 pF 0.1 F 10 nH 12 nH
Description MCH185A560JK VITR 0.1 F 25V CER CAP 0603 X7R 10% TOKO LL 1608-F10NJ TOKO LL 1608-F12NK
Size 0603 0603 0603 0603
MIMIX
Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099 Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com
Page 2 of 5
Characteristic Data and Specifications are subject to change without notice. (c)2007 Mimix Broadband, Inc. Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept their obligation to be compliant with U.S. Export Laws.
0.05-3.0 GHz High Dynamic Range Amplifier
August 2007 - Rev 15-Aug-07
CMM6001-SC
Typical Scattering Parameters (Vd = +5V, Ids = 75 mA, T = 22C, unmatched device in a 50 ohm system)
Frequency (MHz) S 11 (Mag) (Ang) (Mag) S 21 (Ang) (Mag) S 12 (Ang) (Mag) S 22 (Ang)
300 400 500 600 700 800 900 1000 1100 1200 1300 1400 1500 1600 1700 1800 1900 2000 2100 2200 2300 2400 2500 2600 2700 2800 2900 3000
0.313 0.307 0.305 0.304 0.305 0.307 0.310 0.313 0.316 0.318 0.322 0.324 0.327 0.329 0.332 0.335 0.337 0.339 0.340 0.341 0.342 0.343 0.343 0.344 0.344 0.344 0.344 0.344
-38.56 -43.12 -48.70 -54.84 -61.22 -67.68 -74.20 -80.57 -86.85 -93.11 -99.29 -105.40 -111.40 -117.40 -123.40 -129.20 -135.00 -140.80 -146.50 -152.30 -158.20 -164.10 -169.80 -175.80 178.20 172.20 166.10 160.00
4.435 4.382 4.344 4.309 4.270 4.234 4.197 4.158 4.122 4.085 4.043 4.004 3.960 3.919 3.879 3.838 3.799 3.760 3.720 3.679 3.639 3.600 3.561 3.524 3.486 3.448 3.410 3.373
159.70 155.90 151.60 147.20 142.70 138.20 133.60 129.00 124.40 119.90 115.30 110.70 106.20 101.70 97.22 92.77 88.32 83.87 79.47 75.03 70.64 66.25 61.89 57.51 53.16 48.81 44.46 40.13
0.118 0.118 0.118 0.117 0.117 0.117 0.116 0.116 0.115 0.115 0.114 0.114 0.113 0.112 0.112 0.111 0.110 0.109 0.109 0.108 0.107 0.106 0.105 0.105 0.104 0.103 0.102 0.101
-2.96 -7.56 -11.62 -15.23 -18.70 -22.02 -25.29 -28.50 -31.71 -34.88 -37.94 -40.98 -44.08 -47.07 -50.08 -53.15 -56.07 -59.11 -62.08 -65.06 -67.98 -71.02 -73.95 -76.90 -79.96 -82.91 -85.93 -88.99
0.090 0.078 0.072 0.070 0.070 0.071 0.073 0.076 0.078 0.082 0.086 0.090 0.094 0.097 0.101 0.104 0.108 0.111 0.114 0.118 0.121 0.124 0.127 0.130 0.133 0.135 0.137 0.139
-50.49 -44.05 -38.92 -35.16 -32.63 -31.18 -30.88 -31.21 -31.76 -32.50 -33.84 -35.26 -36.85 -38.64 -40.76 -42.85 -45.06 -47.37 -49.53 -51.72 -53.76 -55.82 -57.84 -59.75 -61.67 -63.35 -65.11 -66.85
S-Parameter Data Files are available online at www.mimixbroadband.com.
Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099 Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com
Page 3 of 5
Characteristic Data and Specifications are subject to change without notice. (c)2007 Mimix Broadband, Inc. Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept their obligation to be compliant with U.S. Export Laws.
0.05-3.0 GHz High Dynamic Range Amplifier
August 2007 - Rev 15-Aug-07
CMM6001-SC
Physical Dimensions
4.50 [0.177] 1.73 [0.068]
4
1.55 [0.061] 0.71 [0.028] 0.38 [0.015] 1.70 [0.067]
0.41 [0.016]
XXXXXXX XXXXXX ZYYWW
3.48 [0.137] 2.50 [0.096] 2.06 [0.081] 4.41 [0.163] 5.33 [0.210]
1
2
3
0.99 [0.039] 0.58 [0.023]
1.27 [0.050] 0.86 [0.034]
0.46 [0.18] 3X
1.50 [0.059] 3.00 [0.118]
0.38 [0.015] 0.76 [0.030]
DIMENSIONS IN MILLIMETERS [INCHES]
0.64 [0.025] 3.86 [0.152]
MARKINGS: XXXXXXX = MIMIX MODEL NO. XXXXXX = WAFER LOT NO. ZYYWW = DATE CODE (YR/WEEK) FIRST LETTER COUNTRY OF ORIGIN IF OTHER THAT USA
Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099 Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com
Page 4 of 5
Characteristic Data and Specifications are subject to change without notice. (c)2007 Mimix Broadband, Inc. Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept their obligation to be compliant with U.S. Export Laws.
0.05-3.0 GHz High Dynamic Range Amplifier
August 2007 - Rev 15-Aug-07
CMM6001-SC
Handling and Assembly Information
CAUTION! - Mimix Broadband MMIC Products contain gallium arsenide (GaAs) which can be hazardous to the human
body and the environment. For safety, observe the following procedures: Do not ingest. Do not alter the form of this product into a gas, powder, or liquid through burning, crushing, or chemical processing as these by-products are dangerous to the human body if inhaled, ingested, or swallowed. Observe government laws and company regulations when discarding this product. This product must be discarded in accordance with methods specified by applicable hazardous waste procedures.
Life Support Policy - Mimix Broadband's products are not authorized for use as critical components in life support devices or systems without the express written approval of the President and General Counsel of Mimix Broadband. As used herein: (1) Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury to the user. (2) A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. Package Attachment - This packaged product from Mimix Broadband is provided as a rugged surface mount package
compatible with high volume solder installation. Care should be taken not to apply heavy pressure to the top or base material to avoid package damage. Vacuum tools or other suitable pick and place equipment may be used to pick and place this part. Care should be taken to ensure that there are no voids or gaps in the solder connection so that good RF, DC and ground connections are maintained. Voids or gaps can eventually lead not only to RF performance degradation, but reduced reliability and life of the product due to thermal stress.
Mimix Lead-Free RoHS Compliant Program - Mimix has an active program in place to meet customer and governmental
requirements for eliminating lead (Pb) and other environmentally hazardous materials from our products. All Mimix RoHS compliant components are form, fit and functional replacements for their non-RoHS equivalents. Lead plating of our RoHS compliant parts is 100% matte tin (Sn) over copper alloy and is backwards compatible with current standard SnPb low-temperature reflow processes as well as higher temperature (260C reflow) "Pb Free" processes.
Ordering Information
Part Number for Ordering CMM6001-SC-0G00 CMM6001-SC-0G0T PB-CMM6001-SC-0000 Package Matte Tin plated RoHS compliant SOT-89 surface-mount power package in bulk quantity Matte Tin plated RoHS compliant SOT-89 surface-mount power package in tape and reel Evaluation Board with SMA connectors for CMM6001-SC
We also offer the plastic package with SnPb (Tin-Lead) or NiPdAu plating. Please contact your regional sales manager for more information regarding different plating types.
Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099 Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com
Page 5 of 5
Characteristic Data and Specifications are subject to change without notice. (c)2007 Mimix Broadband, Inc. Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept their obligation to be compliant with U.S. Export Laws.

▲Up To Search▲

Price & Availability of CMM6001-SC07

	To Download CMM6001-SC07 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .